FPVKing SG90 Micro Servo Motor 9G for RC Robot Arm Helicopter Airplane Remote Controls(10Pcs)

  • Sale
  • Regular price $45.00


Key Features: Translucent body Lightweight Less noise SG90 Servo Parameters Size: 21.5mm*11.8mm*22.7mm Weight: 9 grams No load Speed: 0.12 sec / 60 deg (4.8 V) Stall Torque: 1.5-1.7kg/cm (4.8V-6V) Operating Temperature: -30+60 degrees Celsius Dead Zone Setting: 5 microseconds Working Voltage: 4.8V-6V Recommended Model: Mini car, mini ship, helicopter, qirplane Circuit Connection: Yellow line (signal line) Red line (power line) Brown (ground) How to connect SG90 micro servo motor to Arduino UnoThe servo has three leads. The brown one is the Ground,so connect it to Arduino Ground. The red one is VCC which usually requires a voltage between four points eight to seven point two volts. So connect it to Arduino 5V. The orange one is the control signal which needs to be a PWM signal with a periodic time of twenty milliseconds aka 50 Hertz and a duty cycle of one to two milliseconds so five to ten percent. While an on time of one millisecond represents the -90° position of the motor shafts, one point five milliseconds represent 0° position and two milliseconds the plus 90° position. That means you can rotate the shaft a total of 180°. Packager Content: 10 PCS Mini SG90 Servo


Support Arduino, Futaba, JR, Sanwa and Hitec remote system | Application Fields: remote control helicopters, micro robot, robot arm and boats. All kind of R/C Toys and Arduino experiments | Feature with translucent body, lightweight and less noise | No Load Running Speed: 0.09±0.01 sec/60° at 4.8V rotary angle: 120° | Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally









Sold Out